An evolution of the renowned Ether Light mats has arrived with the XR Pro. Staying true to their comfort, durability, the XR Pro boasts ThermalCore technology which increases insulation value while keeping weight and packed volume minimal. Air Sprung Cell construction provides 10cm of plush comfort wherever you sleep. Inflation and deflation are a breeze with the XPRESS valve and Airstream pump built into the stuff sack. With double the weld strength of previous models the XR Pro is perfect for alpine adventurers to winter campers. Outdoor winter sleep never felt this good.

Features

ThermalCore insulation consists of multiple TRM layers that are quiet yet thermally efficient
Four-season capable, ASTM-tested R-Value 7.4
Lighter weight and significantly reduced packed size
Air Sprung Cell construction, 10cm thick for plush comfort in any sleeping position
XPRESS valve and pumpsack integrated into stuff sack make inflation, adjustment and deflation simple
Increased weld strength for greater durability

Tech specs

BEST USE: Winter camping, mountaineering, cold weather backpacking
COMES WITH: Stuff sack with integrated Pumpsack, PillowLock patches, repair kit
MATERIALS: 30/40D nylon with TPU lamination, multi-layer TRM reflective insulation
THICKNESS: 10 cm (3.9 in)
ASTM TESTED R-VALUE: 7.4

FAQ

Is the reflective layer inside the mat noisy?
No. The ThermalCore materials are much softer than traditional reflective films. The construction means the material is not under stress when in use. This is often the case with baffles made of reflective film. Some sound will come from the high-thread count face fabric depending on the sleeping bag/tent floor it comes into contact with.

Can you use an Ether Light XR Pro for winter camping?
Absolutely - the ThermalCore insulation makes it suitable for air/ground temperatures well below freezing. In critical situations, a closed-cell foam mat should always be used as a just-in-case insulating layer.

What's the maximum weight the Ether Light XR mat will support?
An Air Sprung Cell mat normally runs at 0.5 to 0.7psi. More air pressure supports a greater weight. A sleeper weight of 140 kg / 300 lb requires a pressure reachable by mouth inflation, but significantly below the 8psi load limit of the welds

	Small	Regular	Large	Regular Rectangular Wide	Large Rectangular
Fits Up To Height	5 ft 6 in	6 ft	6 ft 6 in	6 ft	6 ft 6 in
Packed Size	8.3 x 4.7 x 4.7 in	8.3 x 4.7 x 4.7 in	9.4 x 4.9 x 4.9 in	9.4 x 5.3 x 5.3 in	9.4 x 5.3 x 5.3 in
Packed Weight	20.6 oz	21.9 oz	27.5 oz	27.5 oz	30.0 oz
Stuff/Pump Sack Weight	2.1 oz	2.1 oz	2.1 oz	2.1 oz	2.1 oz
Weight	18.5 oz	19.8 oz	25.4 oz	25.4 oz	27.9 oz

Ether Light XR Pro Insulated ASC Mat

Q & A