PRO LEVELING KIT

Perfectly aligned reticles made simple—the Pro Leveling Kit delivers a straightforward design that fits a variety of firearms and riflescopes, ensuring precision in every setup.

OPERATIONS

Verification:

1. Place the Reference Bubble Level on the picatinny rail or platform of the rifle. Attach the Picatinny Clip-On level to the picatinny rail by fitting it into the grooves.

2. Ensure Clip-On Bubble Level is centered and matches the Reference Bubble Level by using the supplied 2mm Hex Wrench to loosen/tighten the adjustment screws. Make sure to loosen the opposite set screw in order to not flex the integrated level.

Install:

3. Remove the Reference Bubble Level and install your riflescope. Once installed, add the Reference Bubble Level back onto the flattest part of the riflescope and adjust the riflescope until the two bubbles are centered again.

4. Once the two bubbles match, tighten down your riflescope equally keeping the two levels aligned.

Note: There will be some variation due to the bubbles being separated.
MAINTENANCE

Always double check that you zero the Reference and Clip-On Level prior to use.
If the bubbles are off, your riflescope will not be level.
If the slide gets sticky you can lubricate it with gun oil.
Should it need service, please contact us at: 1-800-4VORTEX (1-800-486-7839)

NOTICE

Virtual Patent Marking Notice By Vortex Optics
This product may be protected by patents in the U.S. and elsewhere for Vortex Optics. http://vtx.legal website is provided to satisfy the virtual patent marking provisions of various jurisdictions including the virtual patent marking provisions of the America Invents Act and provide notice under 35 U.S.C. §287(a). Please visit http://vtx.legal to view list of products that may be covered by one or more U.S./Foreign patents or published patent applications.

Pro Leveling Kit

Q & A