A set of Maxima 34mm high scope rings from Warne Scope Mounts offers excellent holding power at an economical price.

If you have invested in a scope with a larger objective bell, chances are you have invested in quality. Bigger bells hold bigger lenses for letting more light through the lens, and that additional light provides image quality and magnification that other types of tech just can't match.

In order to properly use that scope, you'll need a set of rings that allow you to get the lines between your scope and barrel as close, and as parallel, as possible.

Warne Maxima rings are loaded with innovations and features. The vertically split design offers simplicity and ease of installation, helping you properly sight your scope or optic. American made quality and precision at an affordable price make Warne Maxima scope rings the best in their class. The Maxima Fixed Ring Series fit Weaver style cross slot bases and incorporate a Warne square stainless steel recoil control key in both the front and rear rings. This ensures a "no slip" positive recoil surface across the entire slot of the base and is capable of withstanding the heaviest of recoil.

These 222M 34mm high scope rings can accommodate a scope with an objective up to 56mm. Made from high-quality, precision machined steel, these rings weigh in at 6.4 ounces.

The Maxima square recoil key also protects against swaging or peening of the bases when used on softer or less durable materials. The Maxima Fixed Ring band is also substantially wider for additional clamping surface around the scope to hold the optic firmly in place. Warne Maxima Scope Rings are designed to fit Warne bases as well as all Weaver cross slot and Mil-Spec Picatinny style bases and rails.

Permanently attaches to base or rail
Square recoil control key for positive engagement of ring to base.
Rings securely mount around scope using 4 Torx style T-15 socket cap screws.
At Warne Scope Mounts, we've helped drive innovation and breakthroughs for decades, giving shooting enthusiasts upgraded experiences at the range or out in the field. Contact us today, and our shooting experts can help you improve your build and gain confidence in every shot.
Available in 1, 30mm,34mm and 36mm size.
Designed and MADE IN USA

SPECIFICATIONS

Part Number: 222M
Fits Objective Size: 56mm
Height: High
Dimension A: 34mm
Dimension B: 0.525 inch
Dimension C: 0.705 inch
Finish Color: Matte Black
Weight: 6.4 oz
Material: Steel
Fits Objective Up To: 56mm
Scope Tube Diameter: 34mm
Fits: Maxima/Weaver Bases and Picatinny Rails

INSTALLATION INSTRUCTIONS

Always verify that your firearm is UN-LOADED before performing any service on it. Warne recommends that you loosely assemble rings and scope onto firearm prior to final mounting to verify eye relief and ring spacing.

Remove the 4 screws from both rings.
Place the scope in the ring halves and re-insert recoil key (CZ & Ruger rings do not have specific recoil keys and utilize an integrated recoil management system)
Start all 4 screws on both rings and tighten only the bottom screws to 25in/lb* max.
Place rings onto the bases with the recoil keys in the slots and push each ring towards the muzzle to seat the recoil key
Adjust eye relief and level the reticle and tighten only the bottom screws to 25in/lb* max.
*Torque Spec are for dry threads, DO NOT USE THREAD-LOCKER COMPOUND
**Many scope manufacturers’ have established specific torque ratings for their scope and you must follow their recommended torque.

IMPORTANT: NEVER OVER TIGHTEN ANY BASE OR RING SCREW. NEVER ATTACH A SCOPE IF THE OBJECTIVE TOUCHES THE BARREL OR CAUSES INTERFERENCE WITH THE BOLT, SAFETY OR CYCLING OF THE ACTION. ALWAYS FOLLOW THE FIREARM OR SCOPE MANUFACTURERS’ RECOMMENDED TORQUE SPECIFICATIONS. YOU ARE RESPONSIBLE FOR YOUR OWN GUNSMITHING METHODS.

If you are unsure or do not have the proper tools, please contact a gunsmith for assistance, Warne will not be held liable for stripped/damaged receivers or scopes.

222M Warne 34mm, PA, High Matte Rings

Q & A